1 / 5
앱 충전 포스트 Z3 7kw
Options:
- CW-JL-Z3/384.8 * 249.8 * 129 PC operating ver
| Model No. : | CW-JL-Z3 |
|---|---|
| Specification : | CW-JL-Z3/384.8 * 249.8 * 129 PC operating version (APP) |
제품 설명
|
Product Name |
Charging Post Z3 7kw light guide column section |
|
Model |
CW-JL-Z3 |
|
Specification |
CW-JL-Z3/384.8 * 249.8 * 129 PC operating version (APP) |
|
Charging mode |
Two-dimensional code scanning charge |
|
Means of communication |
Either 4G or GPRS |
|
The length of the gun line |
5M (optional non-standard length) |
|
human–computer interaction |
RGB light strip |
|
Rated Voltage |
Single-phase three-wire 220VAC |
|
Rated power |
7KW(220VAC) |
|
Working Frequency |
45~65Hz |
|
Max. Rated Current |
32A |
|
Operating Temp |
.-40℃—+50C |
|
Protection Class |
IP65 |
|
Number Of Jacks |
New national standard 7 holes |
|
General Standard |
GB/T 18487.1-2015，GB/T34657.1-2017; |
|
Protection function |
Under-voltage, over-voltage, over-current, over-heat, short circuit, leakage, full automatic stop, ungrounded protection |
|
Warranty |
One-year replacement, three-year warranty, lifetime maintenance |
|
Precautions |
1, when installed in open-air places, it is recommended to be equipped with electrical boxes. 2. Make sure the ambient temperature is between -20 ° C and + 50 ° C. Keep away from open fires or baked goods and avoid high temperatures. 3. There should be no strong vibration, inflammable and explosive materials near the installation site, and good ventilation. Shall not be placed in corrosive, corrosive or humid air. Adequate space for cooling and ventilation must be reserved. 4. The installation shall not be located in low-lying areas or in areas prone to water accumulation. The installation site shall not be higher than 2000m above sea level. 5, bracket installation without wall support, it is recommended to use wall-mounted installation, if the use of floor-mounted bracket, fixed installation. Pile installation, should ensure that the pile vertical, and avoid vehicles may pass the route. |
2. 충전 건을 전기 자동차의 충전 포트로 연결하면 표시등이 항상 파란색으로 켜져있어 연결이 성공적으로 연결되어 있습니다. 앱 a alipay 、 wechat, 충전 게시물에서 충전 QR 코드를 스캔하고 작동 단계를 따르십시오. 앱에 의해 충전을 시작하라는 메시지가 표시되면 표시등이 녹색으로 깜박이면 정상 충전을 나타냅니다.
3. 충전 종료 ： 앱에서 "충전 중지"를 클릭하거나 건의 버튼을 누르면 충전을 중지하고 차량 커넥터에서 충전 건을 풀고 다시 놓고 충전 정지를 제자리에 넣으십시오.
이 공급 업체에 문의를 보내십시오