1 / 5
Brand Name : | 중순 |
---|---|
Type : | Welded |
제품 설명
당사의 표준 ANSI Dn 600 블라인드 플랜지는 탄소강 A105 와 파이프 연결에 적용됩니다 . 우리는 작은 순서, 최고의 품질, 합리적인 가격으로 유명한 석유 및 가스 회사와 협력 성공
블라인드 플랜지 기능
블라인드 플랜지 (blind flange)는 파이프 끝을 덮거나 닫는 판입니다
블라인드 플랜지 재질 단조 플랜지
1) ANSI B16.5, ASME B16.47 FLANGE
크기 범위 : 1/2 "~ 80"DN15 ~ DN2000
디자인 : 용접 목, 슬립 온, 블라인드, 소켓 용접, 스레드, 랩 - 조인트
압력 : 150 #, 300 #, 600 #, 900 #, 1500 #, 2500 #
용접 넥 플랜지의 벽 두께 : STD, SCH40, SCH80, SCH160. SCHXXS
재질 : 탄소강 A105, 스테인레스 스틸 304 / 304L, 316 / 316L
코팅 : 흑색 도료, 황색 투명 도료, 냉연 및 용융 아연 도금
패키지 : 견고한 plywooden 케이스, 나무 팔레트
2) EN1092-1 FLANGE
크기 범위 : DN15 ~ DN2000
디자인 : type01 판 플랜지, type02 느슨한 플랜지, type05 블라인드 플랜지, type11 용접 넥킹
플랜지에 type12 슬립, 13 나사산 플랜지를 입력하십시오.
압력 : PN6, PN10, PN16, PN25, PN40, PN64, PN100
재질 : 탄소강 C22.8, S235, S235JR, P235GH, 스테인레스 스틸 : 304 / 304L, 316 / 316L
코팅 : 흑색 도료, 황색 투명 도료, 냉연 및 용융 아연 도금
패키지 : 바다 가치있는 plywooden 케이스, 나무 팔레트
3) DIN FLANGE
크기 범위 : DN15 ~ DN2000
디자인 : 플랜지 위의 슬립 DIN2573,2576,2502,2503, 2543,2545
용접 목 매듭 DIN2631, 2632,2633,2634,2635
블라인드 플랜지 DIN 2527 PN6, PN10, PN16, PN25, PN40
스레드 핀셋 DIN2565,2566,2567,2567
느슨한 플랜지 DIN 2641,2642,2656,2673
재질 : 탄소강 ST37.2, 스테인레스 스틸 1.4301, 1.4404
4) GOST FLANGE
크기 범위 : DN15 - DN 2000
디자인 : 격판 덮개 falnge 12820-80, 용접 목 플랜지 12821-80
압력 : PN6, PN10, PN16, PN25, PN40
재질 : 탄소강 CT-20, 스테인리스 304 / 304L, 316 / 316L
코팅 : 방청유, 냉간 및 열간 아연 도금
패키지 : 바다 가치있는 plywooden 케이스, 나무 팔레트
5) JIS B2220 FALNGE
크기 ragne : 15A to 2000A
디자인 : SOP, BIND, SOH,
Puressure : 1K, 2K, 5K, 10K, 16K, 20K, 30K, 40K
재질 : 탄소강 SS400, 스테인레스 스틸 SUS304, SUS316
코팅 : 방청유, 냉간 및 열간 아연 도금
패킹 : 바다 가치있는 plywooden 케이스, 나무로되는 깔판
블라인드 플랜지 치수
|
Table ANSI, ASME, ASA, B16.5 150lb/sq.in. Blind Flange | |||||||
ø | D | b | g | k | Holes | l | Kg. |
1/2" | 88,9 | 11,1 | 34,9 | 60,3 | 4 | 15,9 | 0,400 |
3/4" | 98,4 | 12,7 | 42,9 | 69,8 | 4 | 15,9 | 0,700 |
1" | 107,9 | 14,3 | 50,8 | 79,4 | 4 | 15,9 | 0,900 |
1 1/4" | 117,5 | 15,9 | 63,5 | 88,9 | 4 | 15,9 | 1,300 |
1 1/2" | 127,0 | 17,5 | 73,0 | 98,4 | 4 | 15,9 | 1,600 |
2" | 152,4 | 19,0 | 92,1 | 120,6 | 4 | 19,0 | 2,600 |
2 1/2" | 177,8 | 22,2 | 104,8 | 139,4 | 4 | 19,0 | 4,100 |
3" | 190,5 | 23,8 | 127,0 | 152,4 | 4 | 19,0 | 5,000 |
3 1/2" | 215,9 | 23,8 | 139,7 | 177,8 | 8 | 19,0 | 6,400 |
4" | 228,6 | 23,8 | 157,2 | 190,5 | 8 | 19,0 | 7,100 |
5" | 254,0 | 23,8 | 185,7 | 215,9 | 8 | 22,2 | 9,000 |
6" | 279,4 | 25,4 | 215,9 | 241,3 | 8 | 22,2 | 11,800 |
8" | 342,9 | 28,6 | 269,9 | 298,4 | 8 | 22,2 | 21,000 |
10" | 406,4 | 30,2 | 323,4 | 361,9 | 12 | 25,4 | 30,000 |
12" | 482,6 | 31,7 | 381,0 | 431,8 | 12 | 25,4 | 45,000 |
14" | 533,4 | 34,9 | 412,7 | 476,2 | 12 | 28,6 | 59,000 |
16" | 596,9 | 36,5 | 469,9 | 539,9 | 16 | 28,6 | 79,000 |
18" | 635,0 | 39,7 | 533,4 | 577,8 | 16 | 31,7 | 97,000 |
20" | 698,5 | 42,9 | 584,2 | 635,0 | 20 | 31,7 | 124,000 |
22" | 749,3 | 46,0 | 641,2 | 692,1 | 20 | 34,9 | 151,000 |
24" | 812,8 | 47,6 | 692,1 | 749,3 | 20 | 34,9 | 188,000 |
NOTE:
1. Class 150 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in `Thickness` (C) and `Length through Hub` (Y1), (Y3). 2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees. 3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub. 4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C). 5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer`s option. |
Table ANSI, ASME, ASA, B16.5 300lb/sq.in. Blind Flange | |||||||
ø | D | b | g | k | Holes | l | Kg. |
1/2" | 95,2 | 14,3 | 34,9 | 66,7 | 4 | 15,9 | 0,700 |
3/4" | 117,5 | 15,9 | 42,9 | 82,5 | 4 | 19,0 | 1,200 |
1" | 123,8 | 17,5 | 50,8 | 88,9 | 4 | 19,0 | 1,500 |
1 1/4" | 133,3 | 19,0 | 63,5 | 98,4 | 4 | 19,0 | 2,000 |
1 1/2" | 155,6 | 20,6 | 73,0 | 114,3 | 4 | 22,2 | 2,900 |
2" | 165,1 | 22,2 | 92,1 | 127,0 | 8 | 19,0 | 3,400 |
2 1/2" | 190,5 | 25,4 | 104,8 | 149,2 | 8 | 22,2 | 5,100 |
3" | 209,5 | 28,6 | 127,0 | 168,3 | 8 | 22,2 | 7,000 |
3 1/2" | 228,6 | 30,2 | 139,7 | 184,1 | 8 | 22,2 | 8,900 |
4" | 254,0 | 31,7 | 157,2 | 200,0 | 8 | 22,2 | 11,800 |
5" | 279,4 | 34,9 | 185,7 | 234,9 | 8 | 22,2 | 15,500 |
6" | 317,5 | 36,5 | 215,9 | 269,9 | 12 | 22,2 | 21,300 |
8" | 381,0 | 41,3 | 269,9 | 330,2 | 12 | 25,4 | 35,200 |
10" | 444,5 | 47,6 | 323,8 | 387,3 | 16 | 28,6 | 57,000 |
12" | 520,7 | 50,8 | 381,0 | 450,8 | 16 | 31,7 | 82,000 |
14" | 584,2 | 54,0 | 412,7 | 514,3 | 20 | 31,7 | 106,000 |
16" | 647,7 | 57,1 | 469,9 | 571,5 | 20 | 34,9 | 140,000 |
18" | 711,2 | 60,3 | 533,4 | 628,6 | 24 | 34,9 | 178,000 |
20" | 774,7 | 63,5 | 584,2 | 685,8 | 24 | 34,9 | 223,000 |
22" | 838,2 | 66,7 | 641,2 | 742,9 | 24 | 41,3 | 270,000 |
24" | 914,4 | 69,8 | 692,1 | 812,8 | 24 | 41,3 | 345,000 |
NOTE:
1. Class 300 flanges except Lap Joint will be furnished with 0.06 (1.6mm) raised face, which is included in `Thickness` (C) and `Length through Hub` (Y1), (Y3). 2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees. 3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub. 4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C). 5. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer`s option. |
Table ANSI, ASME, ASA, B16.5 600lb/sq.in. Blind Flange | |||||||
ø | D | b | g | k | Holes | l | Kg. |
1/2" | 95,2 | 14,3 | 34,9 | 66,7 | 4 | 15,9 | 0,700 |
3/4" | 117,5 | 15,9 | 42,9 | 82,5 | 4 | 19,0 | 1,200 |
1" | 123,8 | 17,5 | 50,8 | 88,9 | 4 | 19,0 | 1,500 |
1 1/4" | 133,3 | 20,6 | 63,5 | 98,4 | 4 | 19,0 | 2,000 |
1 1/2" | 155,6 | 22,2 | 73,0 | 114,3 | 4 | 22,2 | 3,200 |
2" | 165,1 | 25,4 | 92,1 | 127,0 | 8 | 19,0 | 4,300 |
2 1/2" | 190,5 | 28,6 | 104,8 | 149,2 | 8 | 22,2 | 6,000 |
3" | 209,5 | 31,7 | 127,0 | 168,3 | 8 | 22,2 | 8,000 |
3 1/2" | 228,6 | 34,9 | 139,7 | 184,1 | 8 | 25,4 | 10,500 |
4" | 273,0 | 38,1 | 157,2 | 215,9 | 8 | 25,4 | 18,000 |
5" | 330,2 | 44,4 | 185,7 | 266,7 | 8 | 28,6 | 28,500 |
6" | 355,6 | 47,6 | 215,9 | 292,1 | 12 | 28,6 | 35,500 |
8" | 419,1 | 55,6 | 269,9 | 349,2 | 12 | 31,7 | 58,000 |
10" | 508,0 | 63,5 | 323,8 | 431,8 | 16 | 34,9 | 98,000 |
12" | 558,8 | 66,7 | 381,0 | 488,9 | 20 | 34,9 | 125,000 |
14" | 603,2 | 69,8 | 412,7 | 527,0 | 20 | 38,1 | 151,000 |
16" | 685,8 | 76,2 | 469,9 | 603,2 | 20 | 41,3 | 215,000 |
18" | 742,9 | 82,5 | 533,4 | 654,0 | 20 | 44,4 | 287,000 |
20" | 812,8 | 88,9 | 584,2 | 723,9 | 24 | 44,4 | 366,000 |
22" | 869,9 | 95,2 | 641,2 | 777,9 | 24 | 47,6 | 437,000 |
24" | 939,8 | 101,6 | 692,1 | 838,2 | 24 | 50,8 | 532,000 |
NOTE:
1. Class 600 flanges except Lap Joint will be furnished with 0.25 (6.35mm) raised face, which is not included in `Thickness` (C) and `Length through Hub` (Y1), (Y3). 2. For Slip-on, Threaded, Socket Welding and Lap Joint Flanges, the hubs can be shaped either vertical from base to top or tapered within the limits of 7 degrees. 3. Blind Flanges may be made with the same hub as that used for Slip-on Flanges or without hub. 4. The gasket surface and backside (bearing surface for bolting) are made parallel within 1 degree. To accomplish parallelism, spot facing is carried out according to MSS SP-9, without reducing thickness (C). 5. Dimensions of sizes 1/2 through 3 1/2 are the same as for Class 400 Flanges. 6. Depth of Socket (D) is covered by ANSI B 16.5 only in sizes through 3 inch, over 3 inch is at the manufacturer`s option. |
포장 및 배송
품질 관리
블라인드 플랜지 Hs 코드 : 73079100
이 공급 업체에 문의를 보내십시오